Baiter Aider Benefits
everyone can benefit
With the Baiter Aider there's a lot less bending over and reaching down to the deck for bait or lures increasing safety and possibly eliminating, or at least reducing, back pain caused from bending over.
The Baiter Aider helps keep your bait from flying off the boat, spilling over onto the floor, or having to hold the worm container between your feet. It's locking cover keeps the birds from stealing your bait.
Our Patent Pending design allow you to hang lures and hooks around the outside of our attachments keeping your fav's easily within your reach instead of spread throughout your boat. Hooks or Jigs fit nicely also.
Every angler wants their worm to be as lively as possible so keeping it out of the sun is a must. The Baiter Aider allows you to move the bait container into the shade.
Dirty hands equal a dirtier boat, and nobody wants that. So we added a rag holder to the Baiter Aider. It easy to wipe your hands clean after baiting a worm or after landing that record fish.
Pick your tackle off the floor and place it within your reach with our Pro-Series.
The Baiter Aider is plastic so it floats making retrieval easy in case you drop it in the water.
It might be morning or night fishing, when it's dark out you can clip a small light onto the base of the Quad-Aider Knuckle. Shine a little light on the deck and make your excursion easier, safer and more fun. ***Lights not included.
With the Baiter Aider there's a lot less bending over and reaching down to the deck for bait or lures increasing safety and possibly eliminating, or at least reducing, back pain caused from bending over.
The Baiter Aider helps keep your bait from flying off the boat, spilling over onto the floor, or having to hold the worm container between your feet. It's locking cover keeps the birds from stealing your bait.
Our Patent Pending design allow you to hang lures and hooks around the outside of our attachments keeping your fav's easily within your reach instead of spread throughout your boat. Hooks or Jigs fit nicely also.
Every angler wants their worm to be as lively as possible so keeping it out of the sun is a must. The Baiter Aider allows you to move the bait container into the shade.
Dirty hands equal a dirtier boat, and nobody wants that. So we added a rag holder to the Baiter Aider. It easy to wipe your hands clean after baiting a worm or after landing that record fish.
The Baiter Aider is plastic so it floats making retrieval easy in case you drop it in the water.
It might be morning or night fishing, when it's dark out you can clip a small light onto the base of the Quad-Aider Knuckle. Shine a little light on the deck and make your excursion easier, safer and more fun. ***Lights not included.
Baiter Aider Is Easy
it really couldn't any be easier
If you have a pole there's no need to drill a hole. Remove the seat, slide our Base-Aider Package over the seat pole then if so desired replace the seat. Insert the Arm-Aiders into the Quad-Aider Knuckle and slide on the attachment(s). When shore fishing, simply pound a grade stake or pole into the ground.
Our Baiter Aider Pro allows you the ability to have up to four arms each having attachments putting your tackle easily within your reach. Keep many of your favorite baits, lures and tools handy instead of scattered throughout your boat. Our Amateur model allows for two.
Our mini-arms transforms the Baiter Aider into tight and compact system that provides you a more organized way to fish. Or you can stow your seat but leave your pole in place and install the Baiter Aider.
It does't matter if you have a boat or are shore fishing, the Baiter Aider packs up small into a pack style bag. The Baiter Aider is quick to stow and doesn't take up much space.
If you have a pole there's no need to drill a hole. Remove the seat, slide our Base-Aider Package over the seat pole then if so desired replace the seat. Insert the Arm-Aiders into the Quad-Aider Knuckle and slide on the attachment(s). When shore fishing, simply pound a grade stake or pole into the ground.
Our Baiter Aider Pro allows you the ability to have up to four arms each having attachments putting your tackle easily within your reach. Keep many of your favorite baits, lures and tools handy instead of scattered throughout your boat. Our Amateur model allows for two.
Our mini-arms transforms the Baiter Aider into tight and compact system that provides you a more organized way to fish. Or you can stow your seat but leave your pole in place and install the Baiter Aider.
It does't matter if you have a boat or are shore fishing, the Baiter Aider packs up small into a pack style bag. The Baiter Aider is quick to stow and doesn't take up much space.
Pro vs. Am vs. DIY
it depends on your budget
Baiter Aider attachments are designed to fit any base options you choose to use and they are all u/v resistant. The real difference is the base parts and you have three options, our Pro Base parts, our Am-Base (amateur) parts or a DIY base you can build yourself. Our Baiter Aider Pro-Base parts are u/v resistant and our Am-Base parts are made from u/v resistant PVC. If you decide to DIY and buy standard PVC it will fit into the Baiter Aider attachments HOWEVER after a few months in the sun and weather it will dry out soon becoming scratchy and brittle so don't say we didn't warn you!
The Baiter Aider Pro-Base is composed of the Base-Aider, the Sleeve-Aider, Sleeve-Aider Coupler, the Quad-Aider Knuckle and Arm-Aiders. The Sleeve-Aider measures 10" and by using our Sleeve-Aider Coupler it's adjustable for flip-seat, casting seat or our 'no seat' system. All pro packages include white Sleeve-Aiders and Sleeve-Aider Couplers. The Plug-Aiders fit into the top of the Quad-Aider Knuckle to tighten it around the seat pole but it's made to be a little loose. Our Arm-Aiders come in short, which puts the attachment right up against the Quad-Knuckle for seat-less fishing, or long for use with pole seats. They Base-Aider and the Quad-Aider Knuckle are 3D printed and come in 10 colors so you can customize your Baiter Aider.
The Baiter Aider Amateur Base parts are composed of the u/v resistant pvc 10" pieces of pipe(s), a coupler (if for a longer poles) either a u/v resistant tee or a 4 way tee, reducing coupler(s), a u/v resistant 3/4" pvc 12" long pipe(s). The Sleeve-Aider measures 10" and by using our Sleeve-Aider Coupler it's adjustable for flip-seat, casting seat or our 'no seat' system. All packages include white Sleeve-Aiders and Sleeve-Aider Couplers.
Our Mater-Aider is designed to set your tackle boxes and bait containers on while your search for tackle. It measures 8 inches square and has a removable slip resistant pad. Our Mater-Aider makes selecting your bait easier and safer instead bending down to find it on your deck. It's also a great place to set your lunch.
Baiter Aider attachments are designed to fit any base options you choose to use and they are all u/v resistant. The real difference is the base parts and you have three options, our Pro Base parts, our Am-Base (amateur) parts or a DIY base you can build yourself. Our Baiter Aider Pro-Base parts are u/v resistant and our Am-Base parts are made from u/v resistant PVC. If you decide to DIY and buy standard PVC it will fit into the Baiter Aider attachments HOWEVER after a few months in the sun and weather it will dry out soon becoming scratchy and brittle so don't say we didn't warn you!
The Baiter Aider Pro-Base is composed of the Base-Aider, the Sleeve-Aider, Sleeve-Aider Coupler, the Quad-Aider Knuckle and Arm-Aiders. The Sleeve-Aider measures 10" and by using our Sleeve-Aider Coupler it's adjustable for flip-seat, casting seat or our 'no seat' system. All pro packages include white Sleeve-Aiders and Sleeve-Aider Couplers. The Plug-Aiders fit into the top of the Quad-Aider Knuckle to tighten it around the seat pole but it's made to be a little loose. Our Arm-Aiders come in short, which puts the attachment right up against the Quad-Knuckle for seat-less fishing, or long for use with pole seats. They Base-Aider and the Quad-Aider Knuckle are 3D printed and come in 10 colors so you can customize your Baiter Aider.
The Baiter Aider Amateur Base parts are composed of the u/v resistant pvc 10" pieces of pipe(s), a coupler (if for a longer poles) either a u/v resistant tee or a 4 way tee, reducing coupler(s), a u/v resistant 3/4" pvc 12" long pipe(s). The Sleeve-Aider measures 10" and by using our Sleeve-Aider Coupler it's adjustable for flip-seat, casting seat or our 'no seat' system. All packages include white Sleeve-Aiders and Sleeve-Aider Couplers.
Our Mater-Aider is designed to set your tackle boxes and bait containers on while your search for tackle. It measures 8 inches square and has a removable slip resistant pad. Our Mater-Aider makes selecting your bait easier and safer instead bending down to find it on your deck. It's also a great place to set your lunch.
Baiter Aider Users
it's not just for bass boats
The Baiter Aider works great with pole-style flip-up seats. It puts worms and other tackle within easy reach while offering the ability to quickly stand up.
If it's a casting seat you prefer then simply add a base sleeve to adjust its height and its your good to go.
The Baiter Aider works great without any seat too. Leave the pole n place and attach our short arms for a nice compact system.
Simply pound a grade stake into the ground and slip the Baiter Aider over it. It's works great with our Mater-Aider tackle box holder and our Pole-Aider helping keep your pole of the ground when baiting the hook(s).
Our system will soon offer a kayak attachment for those of you who prefer small craft fishing. Checkback or follow us to keep informed.
With our over-sized base parts, most pontoons with accessary pole inserts can utilize our system. With a 2/12 inch ID diameter, it fits most large sized poles.
Life has many challenges and trying to bait your pole in a wheel chair is something most of us anglers have never had to experience, myself included. Upon realizing that those with disabilities often find fishing difficult, we designed the Baiter Aider to help make fishing more accessible to all. Gladly helping to remove barriers!
The Baiter Aider works great with pole-style flip-up seats. It puts worms and other tackle within easy reach while offering the ability to quickly stand up.
If it's a casting seat you prefer then simply add a base sleeve to adjust its height and its your good to go.
The Baiter Aider works great without any seat too. Leave the pole n place and attach our short arms for a nice compact system.
Simply pound a grade stake into the ground and slip the Baiter Aider over it. It's works great with our Mater-Aider tackle box holder and our Pole-Aider helping keep your pole of the ground when baiting the hook(s).
Our system will soon offer a kayak attachment for those of you who prefer small craft fishing. Checkback or follow us to keep informed.
With our over-sized base parts, most pontoons with accessary pole inserts can utilize our system. With a 2/12 inch ID diameter, it fits most large sized poles.
Life has many challenges and trying to bait your pole in a wheel chair is something most of us anglers have never had to experience, myself included. Upon realizing that those with disabilities often find fishing difficult, we designed the Baiter Aider to help make fishing more accessible to all. Gladly helping to remove barriers!
Baiter Aider Attachments
all our parts fit together
Our Pole-Aider has a vertical holder that is made to accept a fishing pole, a soda can, or our other attachments. The sides are slotted to allow lures or hooks to hang from the outside and you can add or remove the lures without taking the attachments off. The little side oval holes are perfect for pliers and other tackle or tools you may need.
Our Add-A Baiter Cups is designed to attach to any of our other attachments including more of itself.
Our Mater-Aider is designed to set your tackle boxes and bait containers on while your search for tackle. It measures 8 inches square and has a removable slip resistant pad. Our Mater-Aider makes selecting your bait easier and safer instead bending down to find it on your deck. It's also a great place to set your lunch.
Be a Pro and record that special moment. Attach an action camera(s) to capture your favorite fishing moments giving you the ability to get shots you normally couldn't obtain. Check out our Pro-Aider Cup. It swivels and locks into our other attachments.
Baiter Aiders arms are strong, durable and made from UV resistant plastic. They are designed to easily attach and detach with a pin. Two arms lengths available: 12" Arm-Aider or our stumpy 6" Arm-Aider is great for no seat use.
Your Baiter Aider is printed using UV resistant plastic. We currently offer 10 color choices to choose from so you can customize it to match your boat or personality. Most of our parts are 3D printed in Vermont, MADE IN AMERICA. We have an order que and once your order comes up we custom print it then mail it you. While we do utilize a pretty impressive 3D print farm, Baiter Aiders take time to print so order early and get to top of the que sooner.
Our Pole-Aider has a vertical holder that is made to accept a fishing pole, a soda can, or our other attachments. The sides are slotted to allow lures or hooks to hang from the outside and you can add or remove the lures without taking the attachments off. The little side oval holes are perfect for pliers and other tackle or tools you may need.
The base of the Multi-Baiter is for placing worms or other bait inside while hanging lures or extra hooks on the outside. Our Add-A-Baiter Cup (sold separately) lets you separate broken worms from whole ones and you can stack containers for many different baits types. Our Baiter-Base also accpets our Pro-Aider and is sized to fit most soda and beer cans, coffee cups or energy drinks.
Our Mater-Aider is designed to set your tackle boxes and bait containers on while your search for tackle. It measures 8 inches square and has a removable slip resistant pad. Our Mater-Aider makes selecting your bait easier and safer instead bending down to find it on your deck. It's also a great place to set your lunch.
Our Add-A Baiter Cups is designed to attach to any of our other attachments including more of itself.
Be a Pro and record that special moment. Attach an action camera(s) to capture your favorite fishing moments giving you the ability to get shots you normally couldn't obtain. Check out our Pro-Aider Cup. It swivels and locks into our other attachments.
Baiter Aiders arms are strong, durable and made from UV resistant plastic. They are designed to easily attach and detach with a pin. Two arms lengths available: 12" Arm-Aider or our stumpy 6" Arm-Aider is great for no seat use.
Your Baiter Aider is printed using UV resistant plastic. We currently offer 10 color choices to choose from so you can customize it to match your boat or personality. Most of our parts are 3D printed in Vermont, MADE IN AMERICA. We have an order que and once your order comes up we custom print it then mail it you. While we do utilize a pretty impressive 3D print farm, Baiter Aiders take time to print so order early and get to top of the que sooner.
Gold Member Club
WIN A FREE
GOLDEN POLE-AIDER
Coming Soon... Show us why you should be a Pro-Angler. Submit your videos from your Action Camera using our Pro-Aider attachment, up to a 60 seconds, and if your video is chosen you win a custom color Pole-Aider, a Baiter Aider baseball cap and a Baiter Aider pint glass.
Coming Soon... Show us why you should be a Pro-Angler. Submit your videos from your Action Camera using our Pro-Aider attachment, up to a 60 seconds, and if your video is chosen you win a custom color Pole-Aider, a Baiter Aider baseball cap and a Baiter Aider pint glass.
Follow us
About Us
